Replacement |
Put on gloves to protect your hands. |
|
1. |
Remove the floor console.
(Refer to Floor Console - "Floor Console Assembly ") |
2. |
Remove the front pillar trim.
(Refer to Interior Trim - "Front Pillar Trim") |
3. |
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim") |
4. |
Remove the instrument cluster.
(Refer to Interior Trim - "Cowl Side Trim") |
5. |
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel") |
6. |
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing") |
7. |
Remove the audio unit or AVN head unit.
(Refer to Body Electrical System - "Audio Unit")
(Refer to Body Electrical System - "AVN Head Unit") |
8. |
Remove the crash pad center lower panel.
(Refer to Crash Pad - "Crash Pad Center Panel") |
9. |
Remove the steering column shroud lower panel.
(Refer to Crash Pad - "Steering Column Shroud Panel") |
10. |
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel") |
11. |
Remove the steering wheel.
(Refer to Body Electrical System - "unction Switch") |
12. |
Remove the center fascia upper panel.
(Refer to Crash Pad - "Center Fascia Panel") |
13. |
Remove the center fascia lower panel.
(Refer to Crash Pad - "Center Fascia Panel") |
14. |
Remove the multi box.
(Refer to Crash Pad - "Multi Box") |
15. |
Using a screwdriver, disconnect or remove the navigation switch (A). |
16. |
Disconnect the navigation switch connectors (A). |
17. |
Loosen the screw and remove the crash pad lower switch panel (A). |
18. |
Disconnect the crash pad lower switch panel connector (A). |
19. |
Loosen the bolts and remove the knee bolster panel (A). |
20. |
Using a screwdriver or remover, remove the photo sensor (A). |
21. |
Disconnect the photo sensor connector (B). |
22. |
Remove the center speaker.
|
23. |
Disconnect the passenger''s airbag connector (A). |
24. |
Disconnect the wiring mounting fasteners (A). |
25. |
After loosening the mounting bolts and nuts, remove the main crash pad assembly (A). |
26. |
Right before removing the main crash pad, slightly pull out
the main crash pad and remove the twitter speaker connector (A) and
mounting (B) located at both ends.
[LH]
[RH] |
27. |
Install in the reverse order of removal.
|
Rear Door Window Glass Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside weatherstrip (A).
3.
Pull down rear door window glass by pressing th ...
Description and Operation
Description
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.
This supplemental system shows the back of the vehicle on ...