Replacement |
Put on gloves to protect your hands. |
|
1. |
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly") |
2. |
Remove the center fascia panel.
(Refer to Crash Pad - "Center Fascia Panel") |
3. |
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel") |
4. |
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing") |
5. |
After loosening the mounting screws, remove the crash pad center lower panel (A). |
6. |
Install in the reverse order of removal.
|
Using a child restraint system
Rearward-facing child restraint system
Forward-facing child restraint system
For small children and babies, the use of a child seat or infant seat is required.
The child seat or infant seat sh ...
Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when :
1. Moisture is frozen to the sensor. (It will operate normally when the moisture
has been cleared.)
2. The sensor is covered with for ...