Kia Sedona: Crash Pad Side Cover Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

[LH]

1.	Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

Install in the reverse order of removal.

Replace any damaged clips.

[RH]

1.	Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

Install in the reverse order of removal.

Replace any damaged clips.

Crash Pad Side Cover Components and Components Location

Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Crash Pad Center Panel Components and Components Location

Component Location 1. Crash pad center lower panel ...

Other Information:

Description and Operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a lamp check. T ...

Variable Intake Solenoid (VIS) Valve Description and Operation
Description Variable Intake manifold Solenoid (VIS) valves are installed on the intake manifold (VIS Valve 1) and the surge tank (VIS Valve 2). VIS valves 1 and 2 control vacuum modulators that ...

Kia Sedona: Crash Pad Side Cover Repair procedures

Crash Pad Side Cover Components and Components Location

Crash Pad Center Panel Components and Components Location

Other Information:

Categories