Replacement |
Put on gloves to protect your hands. |
|
1. |
Disconnect the stopper (B) from the glove box (A). |
2. |
Disconnect the air damper (A) from the glove box (B). |
3. |
Using a screwdriver or remover, remove the crash pad side cover [RH] (A). |
4. |
After loosening the mounting screws and bolts, remove the glove box housing (A). |
5. |
Install in the reverse order of removal.
|
Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir.
Before removing the reservoir cap and ad ...
Cruise Control Switch Repair procedures
Inspection
Measuring Resistance
1.
Disconnect the cruise control switch connector from the control switch.
2.
Measure the resistance between terminals on the control switch when each funct ...