Replacement |
[Center fascia upper panel] |
Put on gloves to protect your hands. |
|
1. |
Lower the steering wheel. |
2. |
Using a screwdriver or remover, remove the center fascia upper panel (A). |
3. |
Disconnect the start/stop button connector (A). |
4. |
Install in the reverse order of removal. |
[Center fascia lower panel] |
Put on gloves to protect your hands. |
|
1. |
Remove the crash pad lower panel.
(Refer to Crash Pad - "Center Fascia Panel ") |
2. |
Loosen the mounting screws and remove the center fascia lower panel (A). |
3. |
Disconnect the controller connector (A). |
4. |
Install in the reverse order of removal. |
Crash Pad Side Cover Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...
Panic
1. Press the panic button (6) for more than 1 second.
2. The horn sounds and hazard warning light flash for about 27 seconds.
✽ NOTICE
To stop the horn and lights, press any button on the sm ...