Replacement |
Put on gloves to protect your hands. |
|
1. |
To remove the gear knob (A) and gear boots (B), pull them up altogether. |
2. |
Using a screwdriver or remover, remove the floor console upper cover (A). |
3. |
Disconnect the connectors (A) from the floor console upper cover. |
4. |
Remove the sunglasses case (A) and then loosen the bolt. |
5. |
Loosen the screw and disconnect the console main connector (A). |
6. |
Loosen the mounting bolts and remove the console assembly (A).
[LH]
[RH] |
7. |
Loosen the console mounting bolts. |
8. |
Loosen the console mounting screws. |
9. |
Disconnect the floor console connector (A). |
10. |
After loosening the mounting screws and bolts, remove the floor console assembly (A). |
11. |
Install in the reverse order of removal.
|
Owner maintenance precautions
Improper or incomplete service may result in problems. This chapter gives instructions
only for the maintenance items that are easy to perform.
As explained earlier in this chapter, several procedu ...
KEY OUT indicator
When the ENGINE START/STOP button is in the ACC or ON position, if any door is
open, the system checks for the smart key. If the smart key is not in the vehicle,
the indicator will blink, and if ...