Kia Sedona: Front Mud Guard Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Mud Guard Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Mud Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, remove the front mud guard (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Wheel Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Rear Mud Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Rheostat Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower switch (A) after l ...

Inhibitor Switch Specifications
Specification ItemSpecificationPower supply (V)12Output typeCombination of output signals Signal Code Table  PP-RRR-NNN-DDSignal "1"12V12V00000Signal "2"012V12V12V000Signal "3"00012V12V12 ...

Categories


Copyright © www.kisedona.com 2016-2024