Kia Sedona: Roof Side Moulding Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Side Moulding Repair procedures

Replacement

[General Type]

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Using a screwdriver or remover, remove the roof side moulding (A).

Install in the reverse order of removal.

Replace any damaged clips.

[Roof Rack Type]

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Remove the roof rack assembly. (Refer to Body Side Moulding - "Roof Rack")

2.	Using a screwdriver or remover, remove the roof side moulding (A).

Install in the reverse order of removal.

Replace any damaged clips.

Roof Rack Repair procedures

Replacement [General Type] Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with pro ...

Rear Spoiler Repair procedures

Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Removing the spare tire
Your spare tire is stored underneath your vehicle, directly below the right sliding door. 1. Open the right sliding door and find the plastic hex bolt cover on the floor. 2. Remove the cover. ...

Relay Box (Engine Compartment) Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay block. Power Relay (Type A) Check for continuity between the terminals. ...

Kia Sedona: Roof Side Moulding Repair procedures

Roof Rack Repair procedures

Rear Spoiler Repair procedures

Other Information:

Categories