Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
Disconnect the rear door cable (A). |
3. |
Disconnect the rear door remote controller connector (B). |
4. |
Loosen the bolts and remove the rear door remote controller (A). |
5. |
Loosen the screw and disconnect the rear door outside handle cable (A). |
6. |
Loosen the nuts (B) and remove the rear door front channel (A). |
7. |
Separate the fixed pin (B) and remove the rear door outside handle cover (A). |
8. |
Separate plug hole (A) and then remove the bolt. |
9. |
Press the fixed pin and then remove the rear door outside handle base (A). |
10. |
Install in the reverse order of removal.
|
Folding the rear seat
The rear seatbacks can be folded to facilitate carrying long items or to increase
the luggage capacity of the vehicle.
WARNING - Folded down seatback
Never allow passengers sit on top of the f ...
Battery Repair procedures
Removal
•
After disconnecting then reconnecting the battery negative cable, reset some parts that require the reset procedures.
(Refer to Body Electrical Sys ...