Kia Sedona: Front Door Belt Outside Weatherstrip Repair procedures - Front Door - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Door Belt Outside Weatherstrip Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Outside Weatherstrip Repair procedures

Replacement
1.
Pull down front door window glass by pressing the power window glass switch.
2.
After loosening the mounting screws, remove the front door belt outside weatherstrip (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Door Latch Repair procedures
Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Remove the front door outside handle base (A) by pushing in the lock pins located in the back. ...

Front Door Belt Inside Weatherstrip Repair procedures
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside weatherstrip (A). 3. Install in the reverse order of removal. ...

Other Information:

LCD Display Control
Type A The LCD display modes can be changed by using the control buttons on the steering wheel. [Type A] (1) ▲ / ▼ : TRIP scroll switch for changing trip modes (2) RESET : RESET bu ...

Troubleshooting
Troubleshooting Customer Complaint Analysis Check Sheet There are six areas where a problem can occur: wiring harness, the radio, the CD player, and speaker. Troubleshooting enables you to nar ...

Categories


Copyright В© www.kisedona.com 2016-2024