Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
2. |
Remove the front door inside handle cage (A). |
3. |
Loosen the screw and remove the IMS switch. |
4. |
After loosening the mounting screws, remove the front door inside handle (A). |
5. |
Install in the reverse order of removal.
|
Front Driveshaft Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to dam ...
Power Seat Motor Repair procedures
Inspection
Diagnosis With GDS
1.
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following in ...