Adjustment |
1. |
After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up and down, or right and left. |
2. |
Adjust the tail gate height by turning the tail gate overslam bumpers (B). |
3. |
After loosening the tail gate striker (C) mounting bolts,
adjust the tail gate striker by moving it up and down, or right and
left. |
Rearview camera
The rearview camera will activate with the ignition switch ON and the shift lever
in the R (Reverse) position
This system is a supplemental system that shows behind the vehicle through the
re ...
Climate Seat Unit Repair procedures
Removal
[Ventilation Blower]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
3.
Remove the front seat outer s ...