Kia Sedona: Hood Latch Release Handle Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement

Using a screwdriver or remover, remove the hood release handle (A).

•	Use a 6mm hex bit to press the center until the handle easily pulls off the post.

Install in the reverse order of removal.

•	Make sure that the hood latch cable is connected properly.

•	Make sure that the hood locks/unlocks and opens/closes properly.

Hood Latch Release Handle Components and Components Location

Component Location 1. Hood latch release handle ...

Hood Latch Components and Components Location

Component Location 1. Hood lower latch assembly ...

Other Information:

Tail Gate Assembly Components and Components Location
Component Location 1. Tail gate assembly ...

Map lamp
Press the lens (1) to turn the map lamp on or off (2) : The light comes on when any door (or tailgate) is opened regardless of the ignition switch position. When doors are unlocked by the ...

Kia Sedona: Hood Latch Release Handle Repair procedures

Hood Latch Release Handle Components and Components Location

Hood Latch Components and Components Location

Other Information:

Categories