Replacement |
Be careful not to damage the fender and body. |
When removing the clips, use a clip remover. |
1. |
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover") |
2. |
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps") |
3. |
Remove the delta fixed glass.
(Refer to "Delta Fixed Glass") |
4. |
Rmove the cowl top side cover (A). |
5. |
Remove the fender side cover (A). |
6. |
Loosen the wheel nut (A) and remove the wheel (B). |
7. |
Remove the front mud guard.
(Refer to "Front Mud Guard") |
8. |
Loosen the front wheel guard mounting clips and screws. |
9. |
Loosen the screw and remove the front bumper bracket (A). |
10. |
Loosen the bolts & nut and remove the fender (A). |
11. |
Install in the reverse order of removal.
|
Passive Occupant Detection System (PODS-F) Repair procedures
Removal
PODS-F ODU (Occupant Detection Unit)
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning to work.
2.
Remove the front passenger seat assembl ...
Hood Assembly Components and Components Location
Component Location
1. Hood assembly
...