Kia Sedona: Parking Brake Cable Repair procedures - Parking Brake System - Brake System - Kia Sedona YP Service ManualKia Sedona: Parking Brake Cable Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Brake System / Parking Brake System / Parking Brake Cable Repair procedures

Removal
Parking brake pedal Type
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the parking brake cable mounting nut (A) and bolts(B).

4.
Remove the parking brake cable adjusting nut(A) and the fixing clip(B), and then remove the parking brake pedal.

5.
Remove the floor console.
(Refer to Body - "Floor console")
6.
Loosen the adjusting nut (A) and the parking brake cables (B).

7.
Raise the vehicle, and make sure that it is securely supported.
8.
Remove the rear wheel & tire.
9.
Remove the parking brake cable (A).

10.
Loosen the parking brake cable bracket bolts and remove the rear parking brake cable.
11.
Install in the reverse order of removal.
Parking Brake Pedal Assembly Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel") 3. Remove the junction b ...

Body (Interior and Exterior)
...

Other Information:

Seat Heater Switch Repair procedures
Removal First Row Seat 1. Disconnect the negative (-) battery terminal. 2. Remove the console upper cover (A). (Refer to Body - "Floor Console Assembly") 3. Disconnect the multimedia con ...

26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Description • 26 Brake control solenoid valve is a Variable Force Solenoid (VFS) type. • When TCM supplies variable current to solenoid valve, hydraulic pressure of 26 brake is ...

Categories


Copyright © www.kisedona.com 2016-2024