Kia Sedona: ESC OFF Switch Repair procedures - ESC(Electronic Stability Control) System - Brake System - Kia Sedona YP Service ManualKia Sedona: ESC OFF Switch Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch Repair procedures

Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the crash pad side switch assembly (A).

4.
Check the continuity between the switch terminals as the ESC OFF switch is engaged.

ESC OFF Switch Description and Operation
Description 1. The ESP OFF switch is used by users to turn off the ESP system. 2. The ESP OFF lamp is on when ESP OFF switch is engaged. ...

Steering Angle Sensor Description and Operation
Description Installed in MDPS (Motor Driven Power Steering), the Steering Angle Sensor (SAS) sends signals to HECU through CAN communication line. The SAS is used to determine turning directio ...

Other Information:

EBD(Electronic Brake-force Distribution) Description and Operation
Operation The EBD system (Electronic Brake Force Distribution), a sub-system of the ABS system, controls the maximum braking effectiveness by the rear wheels. It further utilizes the effici ...

Anti-Pinch Strip Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the anti-pinch strip sensor connector (A). 4. R ...

Categories


Copyright В© www.kisedona.com 2016-2024