Removal |
1. |
Disconnect the brake fiuid level switch connector, and remove the reservoir cap. |
2. |
Remove the brake fluid from the master cylinder reservior with a syringe.
|
3. |
Remove the wheel & tire. |
4. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear |
5. |
Remove the brake hose clip (A). |
6. |
Disconnect the brake hose from the brake caliper by loosening the bolt (C).
Front
Rear |
Inspection |
1. |
Check the brake tubes for cracks, crimps and corrosion. |
2. |
Check the brake hoses for cracks, damage and fluid leakage. |
3. |
Check the brake tube flare nuts for damage and fluid leakage. |
4. |
Check brake hose mounting bracket for crack or deformation. |
Installation |
1. |
Install in the reverse order of removal.
|
2. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding") |
3. |
Check for spilled brake fluid. |
Rear Door Power Window Regulator Repair procedures
Replacement
1.
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
2.
Loosen the mounting nut and remove the rear door power window regulator connector (A).
...
OFF mode
Press the front blower OFF button to turn off the front air climate control system.
However, you can still operate the mode and air intake buttons as long as the ignition
switch is in the ON pos ...