Removal |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Remove the air cleaner assembly (A). |
3. |
Disconnect the brake fluid level switch connector (B), and remove the reservoir cap. |
4. |
Remove the brake fluid from the master cylinder reservoir with a syringe.
|
5. |
Disconnect the brake tube (C) from the master cylinder by loosening the tube flare nut.
|
6. |
Remove the master cylinder (B) from the brake booster after loosening the mounting nuts (A).
|
Installation |
1. |
Install in the reverse order of removal. |
2. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding") |
Vapor Hose and Fuel Filler Cap Repair procedures
Inspection
Vapor hose
1.
Check all the clamps for tightness and the connections for leakage.
2.
Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation.
...
Components and Components Location
Components
[Front]
1. Front carpet
[Rear]
1. Rear carpet
...