Removal |
1. |
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. |
2. |
Remove the front seat assembly.
(Refer to Body - "Front seat") |
3. |
Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch (A). |
Installation |
When installing the harness wires, be sure that they are not pinched or interfering with other parts.
|
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable, and wait for at least 30 seconds before beginning to work. |
3. |
Install the seat belt buckle switch.
|
4. |
Install the front seat assembly.
(Refer to Body - "Front seat") |
5. |
Reconnect the battery negative cable. |
6. |
After installing the seat belt buckle switch, confirm proper system operation:
|
Power steering
Power steering uses energy from the engine to assist you in steering the vehicle.
If the engine is off or if the power steering system becomes inoperative, the vehicle
may still be steered, but it ...
Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. ...