Kia Sedona: Front Impact Sensor (FIS) Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
| Description |
The Front Impact Sensors (FIS) are installed in the Front End
Module (FEM). These remote sensors are used to detect acceleration due
to a collision at the mounting location. The primary purpose of the
Front Impact Sensor (FIS) is to provide an indication of a collision.
The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.
3.
Remove the floor console.
(Re ...
Front Impact Sensor (FIS) Components and Components Location
Components
...
Other Information:
Oil Pressure Switch Repair procedures
Removal and Installation
1.
Remove the air duct.
(Refer to Intake And Exhaust System - "Air Cleaner")
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove th ...
Tail Gate Assembly Repair procedures
Replacement
Wear gloves to protect hands from injury.
When removing and installing the tail gate, work in a group of two or more.
1. ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright В© www.kisedona.com 2016-2024