Removal |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. |
3. |
Remove the floor console.
(Refer to Body - "Floor console") |
4. |
Pull up the lock of the SRSCM connector, and then disconnect the connector (A). |
5. |
Remove the SRSCM mounting bolts (3EA) from the SRSCM, and then remove the SRSCM. |
You must remove or install SRSCM or other SRS components with the ignition switch OFF to avoid accidental airbag deployment. |
Installation |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. |
3. |
Install the SRSCM with the SRSCM mounting bolts.
|
4. |
Connect the SRSCM harness connector. |
5. |
Install floor console.
(Refer to Body - "Floor console") |
6. |
Reconnect the battery negative cable. |
7. |
After installing the SRSCM, confirm proper system operation:
|
Variant coding |
|
Floor Console Assembly Components and Components Location
Component Location
1. Floor console assembly
...
Maintenance when trailer towing
Your vehicle will need service more often when you regularly pull a trailer.
Important items to pay particular attention to include engine oil, automatic transaxle
fluid, axle lubricant and coolin ...