Removal |
1. |
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. |
2. |
Remove the roof trim.
(Refer to Body - "Roof trim assembly") |
3. |
Disconnect the curtain airbag harness connector (A). |
4. |
After loosening the mounting bolts and nuts remove the curtain airbag. |
Installation |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least thirty seconds. |
3. |
Tighten the curtain airbag mounting bolts and nuts.
|
4. |
Connect the curtain airbag connector. |
5. |
Install the roof trim.
(Refer to Body - "Roof trim assembly") |
6. |
Reconnect the battery negative cable. |
7. |
After installing the curtain airbag (CAB), confirm proper system operation:
|
Front Pillar Trim Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. ...
General Information
Important Safety Notice
Proper service methods and repair procedures are essential
for safe, reliable operation of all motor vehicles as well as personal
safety of the operator. The service pro ...