Kia Sedona: Side Airbag (SAB) Module Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and Operation
| Description |
The Side Airbags (SAB) are installed inside the front seat to
protect the driver and front passenger from danger when side crash
occurs. The SRSCM determines deployment of side airbag by using Side
Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the
circuit resistance is measured with a tester, accidental airbag
deployment will result in serious personal injury. |
Passenger Airbag (PAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work.
2.
Remove the main crash pad.
(Refer to Body - "main crash pad assembly ")
...
Side Airbag (SAB) Module Components and Components Location
Components
...
Other Information:
SS-B Solenoid Valve(ON/OFF) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Me ...
Power Seat Control Switch Repair procedures
Inspection
Diagnosis With GDS
1.
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following in ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright В© www.kisedona.com 2016-2024