Kia Sedona: TPMS Sensor Description and Operation

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Sensor Description and Operation

Description

Function

•	By detecting the pressure, temperature, acceleration, and battery condition, transmit information to ECU by a wireless RF.

•

Structure and features

•	In a vehicle, there are 4 TPMS sensors, installed to each wheel.

•	Frequency is changed by FSK, and High Line is used in common.

Mode

•	It is consists of the initial factory mode (EOL test mode), the stop and driving mode, and the automatic learning mode.

Troubleshooting

TPMS Inspection method Inspection Find the inspection number by referring to the table above. The following content is irrelevant of the inspection procedure. 1. ...

TPMS Sensor Repair procedures

Removal 1. Remove the tire. (Refer to Tires/Wheels - "Tire") 2. Remove the screw with torx driver (A). • When installing the bead brake, make sure tha ...

Other Information:

Cluster Ionizer (DATC only) Description and Operation
Description The cluster ionizer disinfects and decomposes bad smell from the air conditioner or air inflow. Also, it cleans the inside air of a vehicle. When the ignition switch is ON, the ion ...

Rear Seat Assembly Components and Components Location
Component Location [Second Row Seat Assembly] 1. Second Row Seat Assembly [RH]2. Second Row Center Seat Assembly3. Second Row Seat Assembly [LH] 1. Second Row Seat Assembly [Third ...

Kia Sedona: TPMS Sensor Description and Operation

Troubleshooting

TPMS Sensor Repair procedures

Other Information:

Categories