Kia Sedona: Wheel Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Suspension System / Tires/Wheels / Wheel Repair procedures

Hub nut tightening sequence

Tighten the hub nuts as follows.

Tightening torque:

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

When using an impact gun, final tightening torque should be checked using a torque wrench.

Run out inspection

1.	Jack up the vehicle.

Measure the wheel Run-out by using a dial indicator as in the illustration below.

Run-out	Aluminum	Aluminum
Radial mm(in.)	0.3(0.0118)	0.7(0.028)
Lateral mm(in.)	0.3(0.0118)	1.1(0.043)

3.	If measured value exceeds the standard value, replace the wheel.

Tire Repair procedures

Tire Wear • Using tires and wheels of other than the recommended sizes can cause unusual handling characteristics and poor vehicle control, resulting in a ...

Tire Pressure Monitoring System

...

Other Information:

Description and Operation
Description This function memorizes the optimized seat position set by the driver into the power seat unit by operating the IMS switch so that the personal setting position of the seat can be r ...

Sunroof Inside Air Recirculation
When the heater or air conditioning system is on with the sunroof opened, the outside (fresh) air position will be automatically selected. At this time, if you press the recirculated air position ...

Kia Sedona: Wheel Repair procedures

Tire Repair procedures

Tire Pressure Monitoring System

Other Information:

Categories