Kia Sedona: Rear Stabilizer Bar Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Suspension System / Rear Suspension System / Rear Stabilizer Bar Repair procedures

Removal

Remove the rear wheel and tire (A) from rear hub .

Tightening torque:

88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

Remove the rear stabilizer bar (A).

(1)	Loosen the nut (D).

(2)	Loosen the bolt (B) and nut (C).

(3)	Remove the stabilizer bar (A).

3.	Install in the reverse order of removal.

Inspection

1.	Check the rear stabilizer bar for deformation.

2.	Check the rear stabilizer link ball joint for damage.

Rear Assist Arm Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage ...

Rear Sub Frame Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage ...

Other Information:

Door Ajar Warning Light
This warning light illuminates : When a door is not closed securely. ...

Electric power steering
Power steering uses the motor to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it will require ...

Kia Sedona: Rear Stabilizer Bar Repair procedures

Rear Assist Arm Repair procedures

Rear Sub Frame Repair procedures

Other Information:

Categories