Kia Sedona: Rear Upper Arm Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Suspension System / Rear Suspension System / Rear Upper Arm Repair procedures

Removal

Remove the rear wheel and tire (A) from rear hub.

Tightening torque:

88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

After loosening the bolt (A) and nut (B), remove the upper arm.

Tightening torque :

137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

3.	Install in the reverse order of removal.

Rear Shock Absorber Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage ...

Rear Lower Arm Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage ...

Other Information:

Components and Components Location
Components 1. Front pillar trim2. Cowl side trim3. Center pillar upper trim4. Center pillar assist trim5. Center pillar lower trim6. Rear pillar trim7. Tailgate fillar trim8. Front door scuff tri ...

Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram ...

Kia Sedona: Rear Upper Arm Repair procedures

Rear Shock Absorber Repair procedures

Rear Lower Arm Repair procedures

Other Information:

Categories