Removal |
1. |
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”) |
2. |
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”) |
3. |
Remove the remove the both side of band (B) of the dynamic damper (A). |
4. |
Fix the driveshaft (A) with a vice (B) as illustrated. |
5. |
Apply soap powder on the shaft to prevent being damaged
between the shaft spline and the dynamic damper when the dynamic damper
is removed. |
6. |
Seperate the dynamic damper (A) from the shaft (B) carefully. |
Installation |
1. |
Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper. |
2. |
Install the dynamic damper. |
3. |
Install the dynamic damper band (A). |
4. |
Using the SST(09495-3K000), secure the TJ boot bands (B).
|
5. |
Install the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ joint”) |
6. |
Install the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”) |
7. |
Check the front alignment.
(Refer to Suspension System - "Front Alignment") |
Instrument panel overview
1. Audio remote control buttons
2. Driver ...
Engine Oil Repair procedures
Replacement
•
Prolonged and repeated contact with mineral oil will result
in the removal of natural fats from the skin, leading to dryness,
irritation and ...