Kia Sedona: Inhibitor Switch Schematic Diagrams

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Schematic Diagrams

Inhibitor Switch Description and Operation

Description • The inhibitor switch is installed on top of transaxle, and is connected to the shift lever through shift cable. • Inhibitor switch signals (S1, S2, S3, S4) are t ...

Inhibitor Switch Repair procedures

Inspection Power Circuit Inspection 1. Disconnect the Inhibitor switch connector. 2. Ignition KEY "ON"" & Engine "OFF".. 3. Measure voltage between supplied power and ground at inhi ...

Other Information:

Repair procedures
Removal 1. Disconnect the negetive (-) battery terminal. 2. Remove the tailgate back panel. (Refer to Body - "Tailgate Back Panel") 3. Remove the back view camera (A) after loosening the ...

To defrost outside windshield
1. Set the fan speed to the highest position. 2. Set the temperature to the extreme hot position. 3. Select the position. 4. The outside (fresh) air and air conditioning will be selected automat ...