Inspection |
1. |
Turn ignition switch OFF. |
2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery") |
3. |
Disconnect the solenoid valve connector (A). |
4. |
Measure the resistance between power terminal (14) and signal terminal (8).
|
Removal |
1. |
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body") |
2. |
Disconnect the input & output speed sensor connector (A). |
3. |
Remove the input & output speed sensor (B) after loosening the bolts.
|
Installation |
1. |
Install in the reverse order of removal.
|
Canister Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the fuel tank.
(Refer to Engine Control / Fuel System - "Fuel Tank")
3.
Disconnect the ...
Alternator Description and Operation
Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this ...