Kia Sedona: Input Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Input Speed Sensor Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications

Specification
Item
Specification
Type
Hall effect sensor
Operation condition (°C)°F
(-40 ~ 150)-40 ~ 302
Output voltage (V)
High: 1.18 ~ 1.68
Low: 0.59 ~ 0.84

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Input Speed Sensor Components and Components Location
Component Location 1. Output speed sensor 2. Input speed sensor ...

Other Information:

Rear Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...

Rear Seat Cushion Cover Components and Components Location
Component Location [Second Row Seat Assembly] 1. Second Row Seat Cushion Cover [RH]2. Second Row Center Seat Cushion Cover3. Second Row Seat Cushion Cover [LH] 1. Second Row Seat Cushion Co ...

Categories


Copyright © www.kisedona.com 2016-2024