Description |
• |
Monitors the vehicle''s operating conditions to determine the optimal gear setting. |
• |
Performs a gear change if the current gear setting differs from the identified optimal gear setting. |
• |
Determines the need for torque converter clutch activation and engages the clutch accordingly. |
• |
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly. |
• |
Diagnoses the faults and failures for automatic transaxle. |
Operation |
To decrease the crusie control set speed
Follow either of these procedures:
Move the lever down (to SET-), and hold it. Your vehicle set speed will
decrease by 10 km/h (5 mph). Release the lever at the speed you want.
Move the lev ...
Front Driveshaft Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to dam ...