Adjustment |
• |
TCM adaptive values learning: When shift shock is occurred or
parts related with the transaxle are replaced, TCM learning should be
performed. |
• |
In the following case, TCM learning is required. |
– |
Automatic transaxle assembly replacement |
– |
TCM upgrading or replacement |
– |
Valve body replacement |
• |
Static learning (condition: ATF temperature 40~100°C (104~212°F) |
1) |
Step on the brake, and then pause for 3 seconds each on "N" range and "D" range. |
2) |
Repeat the above procedure four times. |
• |
Driving learning |
1) |
Drive the vehicle through all the gears. (1st → 2nd → 3rd → 4th → 5th → 6th)
|
2) |
Decelerate the vehicle by stepping on the brake (6th → 5th → 4th → 3rd → 2nd → 1st). |
3) |
Repeat the above procedure four times. |
Blind Spot Detection Indicator Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (A) from the mirror holder.
Be careful not to damage the fixing clips (A).
3.
...
Smart Cruise Control Unit Components and Components Location
Component Location
...