Troubleshooting |
Limp Home Mode |
Limp Home Mode: Limited shifting
Mechanical limp home mode: Fixed shifting (failure as mechanical parts, solenoid valves, TCM, CAN communication) |
Trouble symptom | Suspect area | Remedy |
Shifting delay, Shifting shock, Poor acceleration | Damaged clutch / brake | Replace the brake or clutch. |
Faulty hydraulic control | Inspect the solenoid valve. | |
Faulty hydraulic supply | Inspect the fluid level. | |
Inspect the fluid cleanliness | ||
Replace the oil pump | ||
Not performed TCM learning | Perform the TCM adaptive value learning. | |
Mechanical limp home mode (locked into 4th, manual shifting disabled) | Faulty Solenoid valve | Inspect the solenoid valve. |
Replace the valve body. | ||
Faulty TCM | Replace the TCM. | |
Faulty CAN communication | Inspect the CAN communication line. | |
Limp home mode (locked into 4th, manual shifting 2nd-4th enabled) | Faulty input & output speed sensor | Replace the input & output speed sensor. |
Limp home mode (1st-2nd shifting disabled, 3rd-6th shifting enabled) | Faulty inhibitor switch | Replace the inhibitor switch. |
Manual shifting disabled | Faulty TCM | Replace the TCM. |
Faulty connector connection | Check the connection of manual mode connector. | |
Faulty manual mode switch | Replace the manual mode switch housing. |
Components and Components Location
Component Location
1. Fuel filler door open switch2. Fuel filler door release actuator
...
Left or Right power sliding door opening or closing
This function will be operated when the power door ON/OFF button is ON (not depressed).
Using the power sliding door handle
1. Carry the smart key.
2. Pull the power sliding door handle once.
3. T ...