Removal |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”) |
2. |
Disconnect the fuel sender connector (A) and fuel pump connector (B). |
3. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup. |
4. |
Remove the reservoir cup (B) after releasing the fixing hook (A). |
5. |
Disconnect the ground line (A). |
6. |
Remove the fuel pressure regulator after remove the fixing pin (A). |
Installation |
1. |
Install in the reverse order of removal. |
Power tailgate non-opening conditions
The power tailgate will not open automatically, but will close under the following
conditions.
When the ignition switch is in the ON position,
1. Vehicle is moving above 3 km/h (2 mph).
2. The ge ...
Main Crash Pad Assembly Components and Components Location
Component Location
1. Main crash pad assembly
...