Kia Sedona: Fuel Sender Repair procedures - Fuel Delivery System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Fuel Sender Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Sender Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).
3.
Lift the fixing hook (B) by using a common driver, and then remove the fuel sender (C).

Installation
1.
Install in the reverse order of removal.
Fuel Pump Motor Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A) and fuel pump connector (B). 3. Remove the cushion pipe fixi ...

Fuel Pressure Regulator Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A) and fuel pump connector (B). 3. Remove the cushion pipe fixi ...

Other Information:

Specifications
Specifications DescriptionSpecificationsLimitGeneralTypeV-type, DOHCNumber of cylinders6Bore92 mm (3.6220 in.)Stroke83.8 mm (3.2992 in.)Total displacement3,342 cc (203.94 cu.in.)Compression ratio ...

Dynamic Damper Repair procedures
Removal 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Remo ...

Categories


Copyright © www.kisedona.com 2016-2024