Kia Sedona: Seat Belt Buckle Switch (BS) Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and Operation
| Description |
The SRSCM shall monitor the status of the driver and front
passenger seat belt buckle. The SRSCM provides one pin each for the
driver and front passenger seat belt buckle status input. The seat belt
buckle circuit operates from internal boost voltage supplied by the
SRSCM, and uses chassis ground for the signal return. The buckle status
shall modify the SRSCM deployment. If the buckle status is unbuckled,
the corresponding pretensioner will not be deactivated.
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure Side Impact Sensor (P-SIS)
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
...
Other Information:
Tripmeter (1)
...
Center Fascia Panel Repair procedures
Replacement
[Center fascia upper panel]
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wra ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright © www.kisedona.com 2016-2024