Kia Sedona: Roof Side Moulding Repair procedures
[General Type]
|
Put on gloves to protect your hands. |
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
|
•
|
Take care not to scratch the body surface. |
|
| 1. |
Using a screwdriver or remover, remove the roof side moulding (A). 
|
| 2. |
Install in the reverse order of removal.
|
Replace any damaged clips. |
|
[Roof Rack Type]
|
Put on gloves to protect your hands. |
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
|
•
|
Take care not to scratch the body surface. |
|
| 1. |
Remove the roof rack assembly.
(Refer to Body Side Moulding - "Roof Rack") |
| 2. |
Using a screwdriver or remover, remove the roof side moulding (A). 
|
| 3. |
Install in the reverse order of removal.
|
Replace any damaged clips. |
|
Replacement
[General Type]
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
pro ...
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...
Other Information:
Rear Oil Seal Repair procedures
Replacement
1.
Remove the transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
3.
Remov ...
Cruise SET Indicator Light
This indicator light illuminates :
...
Roof Rack Repair procedures
Rear Spoiler Repair procedures