Kia Sedona: Roof Rack Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Roof Rack Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Rack Repair procedures

Replacement
[General Type]
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the roof rack front cover (A) and roof rack rear cover (B).
2.
Remove the roof rack center cover (C).
3.
After loosening the mounting nuts, remove the roof rack assembly (D).

Tightening torque :
3.9 ~ 4.4 N.m ( 0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft )

4.
Install in the reverse order of removal.
   
Replace any damaged clips.

1. Roof rack front cover
2. Roof rack rear cover
3. Roof rack center cover
4. Roof rack assembly

Body Side Moulding
...

Roof Side Moulding Repair procedures
Replacement [General Type]     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with pro ...

Other Information:

Closing the tailgate
To close the tailgate, lower and push down the tailgate firmly. Make sure that the tailgate is securely latched. Make sure your hands, feet and other parts of your body are safely out of the wa ...

Finish damage repair
Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense. If your vehicle is damaged and requires ...

Categories


Copyright © www.kisedona.com 2016-2024