Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the crash pad lower switch (A) after loosening the mounting screws. |
4. |
Remove the rheostat switch connector (A). |
5. |
Check for intensity of rheostat switch. If the light
intensity of the lamps changes smoothly without any flickering when the
rheostat is turned on, it can be assumed that the rheostat is operating
normally. |
Emergency towing precautions
Turn the ignition switch to ACC so the steering wheel isn ...
Transmitter Repair procedures
Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check voltage if the red light doesn''t flicker ...