Removal and Installation |
1. |
Disconnect the over flow hose (A), and then drain the coolant from the reservoir tank. |
2. |
Remove the reservoir tank (B).
|
3. |
Install in the reverse order of removal. |
4. |
Refill the coolant. |
Programming
Your vehicle may require the ignition switch to be turned to the ACC position
for programming and/or operation of HomeLink. It is also recommended that a new
battery be replaced in the hand-held t ...
Components and Components Location
Component Location
1. Rear glass defogger relay (Built-in engine room relay box)2. Rear glass defogger switch (DATC type)3. Rear glass defogger switch (Manual type)4. Rear glass defogger
...