Removal |
1. |
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover") |
2. |
Remove the mounting clip (A). |
3. |
Remove the low pitch horn (C) after disconnecting the horn connector (B) and loosening the mounting bolts. |
1. |
Remove the front bumper upper cover (A) after loosening the screws. |
2. |
Remove the mounting clip (A). |
3. |
Remove the high pitch horn (C) after disconnect the horn connector (B) and loosening the mounting the bolts. |
Installation |
1. |
Install the low pitch horn after connecting the connector. |
2. |
Install the mounting clip. |
3. |
Install the engine room under cover. |
1. |
Install the high pitch horn after connecting the connector. |
2. |
Install the mounting clip. |
3. |
Install the front bumper upper cover. |
Inspection |
1. |
The relay on the horn of this vehicle is implanted into the metal core block PCB of the engine room relay block. |
The relay inserted in the semi-conductor on the PCB cannot be
replaced on its own, instead, it must be replaced as a complete unit.
The internal metal core box must be tested and replaced with new part
when refurbished. |
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate).
Press the button again to turn the air conditioning system off. ...
Before starting
Close and lock all doors.
Position the seat so that all controls are easily reached.
Buckle your seat belt.
Adjust the inside and outside rearview mirrors.
Be sure that all lights work.
C ...