Kia Sedona: Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Trunk Trim / Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

Take care not to bend or scratch the trim and panels.

1.	Remove the second row seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Remove the third row seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")

3.	Remove the fourth row seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")

4.	Remove the rear door scuff trim. (Refer to Interior Trim - "Door Scuff Trim")

5.	Remove the tailgate piller trim. (Refer to Interior Trim - "Rear Piller Trim")

6.	Remove the rear transverse trim (A) using the screwdrive or remover.

7.	Remove the fire extinguisher cover (B).

8.	Remove the fire extinguisher bracket (C) after loosening the bolts.

9.	Remove the luggage side trim (D) after loosening the mounting screws and bolts.

10.

Install in the reverse order of removal.

Replace any damaged clips.

1 . Rear transverse trim
2 . Fire extinguisher cover
3 . Luggage side trim [LH]

4. Luggage side trim [RH]
5. Fire extinguisher bracket
6. Fire extinguisher

Other Information:

CVVT Oil Temperature Sensor (OTS) Repair procedures
Inspection [Resistance Inspection] 1. Turn the ignition switch OFF. 2. Remove the OTS. (Refer to "Removal") 3. After immersing the thermistor of the sensor into engine coolant, measure ...

Emergency tailgate safety release
Your vehicle is equipped with an emergency tailgate safety release lever located on the bottom of the tailgate. When someone is inadvertently locked in the cargo area, the tailgate can be opened ...

Kia Sedona: Repair procedures

Trunk Trim

Windshield Glass

Other Information:

Categories