Kia Sedona: Repair procedures - Steering wheel - Steering System - Kia Sedona YP Service ManualKia Sedona: Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Steering System / Steering wheel / Repair procedures

Removal
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
Remove the airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
4.
Disconnect the connector & lock nut (A) and then remove the steering wheel by using special service tools (09561-11001).

Tightening torque :
39.2 ~ 49.0 N.m (4.0 ~ 4.5 kgf.m, 28.9 ~ 36.2 lb-ft)

   
•
When removing the steering wheel, do not impact it by hammering as it may damage the steering column.

5.
Install in the reverse order of removal.
Disassembly
1.
Disconnect the remote control switch (A).

2.
Disconnect the remote control switch connector (A).

3.
Disconnect the bezel (A).

4.
Disconnect the lower cover (A).

5.
Install in the reverse order of removal.
Components and Components Location
Components 1. Bezel2. Steering wheel3. Remote control assembly4. Wiring5. Lower cover6. Multifunction switch ...

Heated Steering wheel Description and Operation
Description When manually selected, the heated steering wheel system improves the thermal comfort of the driver by heating the steering wheel. Heated pad ItemSpecificationVoltage13.5 VHeate ...

Other Information:

Power outlet
Front Rear The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 am ...

Installing the tumble seat (for 8 passenger vehicle)
1. Put the front anchor strikers along the front anchors on the floor. 2. Insert two front anchor strikers into the front anchors. 3. Lift the rear portion of the seat cushion then push down fir ...

Categories


Copyright В© www.kisedona.com 2016-2024