To remove the headrest :
1. Raise it as far as it can go then press the release button (1) while pulling the headrest up (2).
To reinstall the headrest :
1. Put the headrest poles (3) into the holes while pressing the release button (1).
2. Adjust it to the appropriate height.
After installing the headrest, make sure that it is installed in the right direction.
A headrest installed reversely could increase whiplash injury during rear impact.
WARNING
The second row headrest is equipped with auto-folding function.The cable may become dislocated or damaged when the headrest is removed, and may lead to auto-folding function failure.
Power Steering Fluid Repair procedures
Inspection
Check that the power steering fluid is filled up to the level of MAX level mark on the reservoir. ...
Rear temperature control
From front seat
Set the rear climate control selection (REAR ON) button to the ON position and
turn the rear temperature control (REAR TEMP) knob in the front climate control
panel to the desir ...