Kia Sedona: Rear Wheel Guard Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Wheel Guard Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Wheel Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
Remove the rear mud guard.
(Refer to Body Side Moulding - "Rear Mud Guard")
3.
After loosening the mounting clips and screws, remove the front wheel guard (A).

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Wheel Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Front Mud Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Air Cleaner Repair procedures
Removal and Installation Air Cleaner Assembly 1. Remove the engine cover. (Refer to Engine And Transaxle Assembly - "Engine Cover") 2. Remove the air duct (A). 3. Remove the battery. (R ...

Repair procedures
Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line"). ...

Categories


Copyright © www.kisedona.com 2016-2024