Kia Sedona: Rear Washer Motor Repair procedures - Rear Wiper/Washer - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Rear Washer Motor Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Washer Motor Repair procedures

Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
   
Before filling the reservoir tank with water, check the filter for any foreign material or contamination. If necessary, clean the filter in the pump motor.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
3.
Connect positive (+) and negative (-) battery cables to terminals 3 and 2 respectively to see that the washer motor runs and water is pumped.
4.
Check that the motor operates normally.
Replace the motor if it operates abnormally.
No.
Description
1
Rear washer (+)
2
Ground

Rear Washer Switch Repair procedures
Inspection 1. Check for continuity between the terminals while operating the wiper and washer switch. If it is not in normal condition, replace wiper and wiper switch. Rear Wiper Switch Rear ...

Seat Electrical
...

Other Information:

Rocking the vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth betwe ...

Window opening and closing
The driver ...

Categories


Copyright В© www.kisedona.com 2016-2024