Kia Sedona: Rear Stabilizer Bar Repair procedures - Rear Suspension System - Suspension System - Kia Sedona YP Service ManualKia Sedona: Rear Stabilizer Bar Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Suspension System / Rear Suspension System / Rear Stabilizer Bar Repair procedures

Removal
1.
Remove the rear wheel and tire (A) from rear hub .

Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

   
Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

2.
Remove the rear stabilizer bar (A).
(1)
Loosen the nut (D).
(2)
Loosen the bolt (B) and nut (C).
(3)
Remove the stabilizer bar (A).

3.
Install in the reverse order of removal.
Inspection
1.
Check the rear stabilizer bar for deformation.
2.
Check the rear stabilizer link ball joint for damage.
Rear Assist Arm Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Rear Sub Frame Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Other Information:

Foward collision warning system (FCWS)
The Foward Collision Warning System helps avoid accidents by identifying critical situations early and warning the driver. ...

A/V Mode
This mode displays the state of the A/V system. ...

Categories


Copyright В© www.kisedona.com 2016-2024