Kia Sedona: Rear Spoiler Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Spoiler Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Spoiler Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the tail gate upper trim.
(Refer to Tail Gate - "Tail Gate Trim")
2.
Disconnect the washer nozzle hose (A) and high mounted stop lamp connector (B).

3.
Remove the rear spoiler plug hole cap (A) and then loosen the nuts (B).

Tightening torque :
5.9 ~ 6.4N.m (0.6 ~ 0.65kgf.m, 4.3 ~ 4.7lb-ft)

4.
Remove the rear spoiler (A).

5.
Install in the reverse order of removal.
   
•
Make sure that the connectors are plugged in properly.
•
Replace any damaged clips.
Roof Side Moulding Repair procedures
Replacement [General Type]     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with pro ...

Front Wheel Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Tilting the sunroof (for front sunroof)
To open the sunroof, push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof, push the sunroof lever forward or pull downward until the sunro ...

Blade replacement
When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. To prevent damage to the wiper arms or other components, do not attempt to move the wipers ...

Categories


Copyright © www.kisedona.com 2016-2024