Inspection |
1. |
Turn the ignition switch ON. |
2. |
Manually operate the control switch and measure the voltage of the blower motor. |
3. |
Operate the control switch to raise the voltage up to high speed.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim") |
3. |
Disconnect the power mosfet connector and then remove the power mosfet (A) after loosening the screws. |
4. |
Install in the reverse order of removal. |
Roof Rack Repair procedures
Replacement
[General Type]
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
pro ...
Automatic transaxle
Depress the brake pedal and the lock
release button when shifting. (If the shift lock system is not equipped, it is not
necessary to depress the brake pedal. However, it is recommended to depre ...